







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Pinewood, FL: What You’re Actually Buying
Paver driveways in Pinewood, FL run $7,000 to $18,000 for a typical two-car driveway, and most jobs take 4 to 7 working days from demo to final compaction. You’re buying three things at that price: a base that drains South Florida’s wet-season rain, a surface that holds up under intense UV without fading to chalk, and an edge restraint system that keeps the whole field locked tight through hurricane-season wind. Call (844) 797-4868 and we’ll walk your driveway, check the existing base, and put a line-item number in writing.
How a Paver Driveway Gets Built Here, Stage by Stage

Paver work looks simple from the curb. Underneath, it’s a base-construction job with a decorative top. Here’s the actual sequence we run on a Pinewood driveway.
Stage 1: Demo and haul-off (day 1). We break out the existing concrete, asphalt, or old pavers and haul it away. On mid-century CBS properties in Pinewood, this is also where we find out what the original slab is sitting on. Some driveways here were poured over fill that never compacted properly. If the subgrade is soft or has settled, that changes the base plan, and we tell you before we go further, not after.
Stage 2: Excavation and grading (day 1 into day 2). We dig down to accommodate the base depth your driveway needs, then grade it so water runs away from the garage and toward the street or a swale. This is the stage where a Pinewood driveway lives or dies. Our wet season drops rain in fast, heavy bursts, and a base that holds water will pump and shift within two summers. You’ll see us checking slope with a level and a string line, not eyeballing it.
Stage 3: Base, compaction, and edge restraint (day 2 into day 3). We lay compacted aggregate base in lifts and run a plate compactor over each one. Then the edge restraint goes in, spiked and set in concrete along the sides. That restraint is what stops the field from spreading outward over time. You decide nothing here except to confirm the layout matches the plan, and this is also the moment to decide whether you want any border course or soldier-course detail along the edges.
Stage 4: Setting bed and paver installation (day 3 into day 5 or 6). A thin layer of bedding sand gets screeded level, then the pavers go down in your chosen pattern. Herringbone, running bond, basketweave, a mixed field with a contrasting border: this is the big decision point, and you’ll want to lock it in before day 1, not mid-install. A two-car driveway typically covers 400 to 600 square feet, and a crew lays roughly 150 to 250 square feet of pavers a day depending on pattern complexity. Herringbone is slower and eats more cuts at the edges.
Stage 5: Compaction, sand, and cleanup (final day). We run a compactor over the finished field, sweep polymeric or regular joint sand into the joints, and clean the site. Joint sand is what locks the pavers together and blocks weeds and water intrusion. Polymeric sand costs more but resists washout better through heavy rain. On a Pinewood driveway, we lean toward polymeric for that reason. Most jobs we finish in a single visit to completion, with the driveway drivable the day we finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost swing on a Pinewood paver driveway comes down to material and pattern. Here’s what actually gets chosen, and the honest trade-off on each.
- Concrete pavers (the default): The most common pick for a reason. They handle UV, hold color well when they’re a quality product, and run in the mid-to-upper part of the $7,000 to $18,000 range depending on size. Belgard is a solid benchmark here; several of our material partners make comparable lines. Trade-off: they’re heavier and pricier than thin-profile options.
- Clay brick pavers: Genuinely beautiful on a mid-century Pinewood home with a stucco exterior. They hold color for decades. Trade-off: higher cost, and installation is slower because of cuts and pattern work.
- Permeable pavers: Open-joint or specially shaped pavers that let water drain through the surface. In a region with a real wet season, these solve a drainage problem that solid pavers can’t. Trade-off: they need a properly engineered open-graded base, so the base cost goes up, and maintenance means keeping the joints clear.
- Pattern choice (herringbone, running bond, basketweave): Herringbone locks together best and resists shifting; it also costs more in labor and edge cuts. Running bond is simpler and cheaper. You’ll want to see samples laid out before you commit.
- Joint sand (regular vs. polymeric): We covered this above, but it belongs on your decision list. Polymeric sand costs more up front and earns it back in fewer re-sands.
- Border and accent courses: A contrasting soldier course or border adds a finished look and a modest cost bump. On a mid-century Pinewood home, a simple border often reads better than a busy pattern.
What Paver Driveways Cost in Pinewood, FL

Paver driveway installation in Pinewood runs $7,000 to $18,000, and a driveway replacement involving demo of the old surface sits in the $5,000 to $14,000 band before you account for the new paver field. Those two ranges often overlap on paper, so the real number comes from what’s underneath your existing driveway.
Here’s what pushes a Pinewood job toward the low end versus the high end:
- Square footage and layout: A standard two-car driveway with a straight run is the simple case. Curves, tight corners, and a turnaround apron all add cuts and time.
- What the old driveway is made of: Breaking out concrete and hauling it is more work than pulling up old pavers. Asphalt is somewhere in between.
- What’s under the slab: Soft fill, settled spots, or poor drainage means deeper excavation and more base material. This is the single most common reason a written estimate moves after demo begins, which is why we look before we quote.
- Material and pattern: Clay brick and intricate herringbone sit at the top; concrete pavers in running bond sit closer to the middle.
- Drainage work: Permeable systems, trench drains, or regrading toward a swale add cost but solve problems that come back if you skip them.
A written estimate from us is line-item: demo, haul-off, base materials, compaction, edge restraint, sand, pavers, labor. What it typically doesn’t include is anything we can’t see until the old surface is gone, and we say so on the estimate rather than surprising you later. This is also the stage where we’ll show you how the driveway ties into the wider scope if you’re part of a full Driveway & Pavers in Pinewood project.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Pinewood, ZIP 33167, sits in Miami-Dade’s inland northwest corridor, and building here runs through the county’s permitting and inspection system rather than a separate city hall. That matters for a paver driveway in a way it wouldn’t in a Broward or Palm Beach suburb: any work that touches the footprint or grade can run through county e-permits and private provider inspections under the High Velocity Hurricane Zone product-approval rules that apply countywide. A straight paver swap on an existing footprint is usually lighter on permits than new construction, but drainage and grade changes can pull you into the process. We handle that paperwork as part of the job.
The housing stock shapes the work too. Most of the driveways we see in Pinewood are attached to mid-century CBS homes with stucco exteriors, carports, and sometimes decades of patched concrete underfoot. Those older slabs often sit on fill that’s settled at the edges, which is why the driveway apron near the street is frequently the first thing to crack and shift. We also see jalousie-turned-awning windows and low-slope roofs, which tells you these homes have been retrofitted over the years, and it’s worth knowing whether the driveway grade feeds water toward the house or away from it. If you’re also thinking about the front entry, homeowners often pair this with Door Installation in Pinewood so the curb appeal upgrade lands all at once.
On the climate side, intense UV chalking and the May-October wet season are the two things that decide whether a Pinewood driveway looks good in year five or looks tired. We choose pavers and joint sand with that in mind, and we grade for rain from day one. You can see the full range of what we do with the wider Driveway & Pavers service if you’re still deciding on scope.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Pinewood

Most paver driveways in Pinewood take 4 to 7 working days from demo to final compaction, with a standard two-car job typically landing around 5. Larger layouts, intricate herringbone patterns, and base problems that need deeper excavation push toward the top of that range. Call (844) 797-4868 and we’ll give you a realistic schedule for your specific driveway, not a guess.
Not always, but sometimes yes, and it depends on what changes. A straight paver replacement over an existing footprint usually doesn’t require a permit. If the job involves changing the driveway’s grade, altering drainage, or expanding the footprint, county e-permits and inspections come into play under Miami-Dade’s rules. We tell you which case you’re in before demo day and pull the permits when they’re needed.
Paver driveway installation in Pinewood runs $7,000 to $18,000, and a replacement involving demo of the old surface typically sits in the $5,000 to $14,000 band before the new paver field. Square footage, base condition, material choice, and drainage work move that number. Call (844) 797-4868 for an exact quote; estimates are free.
Sometimes, but we rarely recommend it in Pinewood. Setting pavers over an existing slab means every crack and settling problem underneath transfers straight through to the new surface, and mid-century Pinewood slabs often have exactly those issues. We look at the slab before deciding, and if it’s sound, an overlay can save money. If it isn’t, you’ll hear that from us plainly.
Our paver driveways are covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship for two full years, and it’s one of the longest workmanship guarantees in the residential construction space. Pricing is upfront, the number you see is the number you pay, and we also offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
Get a Free Paver Driveway Estimate in Pinewood
We’ll come out, measure the existing driveway, check the base and drainage, and hand you a written line-item estimate for paver driveways in Pinewood, FL. No pressure, no vague “it depends” pricing. Calls are answered by a live person 24/7, so you can reach us any time at (844) 797-4868. We serve homeowners across Pinewood, and our technicians have up to 12 years of experience on this kind of work.
Written by the team at Groundwork Construction Co.












