







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in North Miami Beach, FL: The CBS Masonry Method
To measure a window for replacement, you measure the existing frame’s daylight opening – the visible glass area plus the frame interior – not the rough masonry opening behind the stucco. That single distinction is the whole ballgame in North Miami Beach, where most of the housing stock is 1950s-70s concrete-block-and-stucco rather than wood frame, and where the replacement impact unit sits in a buck anchored to the block. Get the daylight opening and the reveal depth right, and you order a window that fits. Guess at it, and you eat a custom unit that won’t. If you’d rather skip the tape measure entirely, call Groundwork Construction Co. of North Miami Beach at (844) 797-4868 – the site visit is free and there’s no pressure to buy.

Why Every Generic “How to Measure a Window” Guide Fails You Here
Almost every measuring guide online assumes a wood-framed rough opening behind drywall. You pop the trim, measure the studs, subtract a quarter inch, order a unit. None of that maps to North Miami Beach.
Your walls are concrete masonry units under a stucco coat. There are no studs to find. The original windows in these mid-century homes were set into the block with a stucco return and, depending on the year, either a wood or steel frame that’s been baked by fifty years of subtropical sun. The opening in the block is wider than the finished window. What you actually need for a replacement is the daylight opening of the existing frame plus the depth of the masonry reveal, because the new impact window drops into an installation buck that’s anchored back into the block – and the buck changes how much of that opening the new unit can occupy.
Here’s the practical difference in what you need to record:
- Wood-frame guide says: measure the rough opening (stud to stud).
- North Miami Beach CBS reality: measure the existing frame’s inside daylight opening, top, middle, and bottom, then left, middle, and right – three of each, because the opening is rarely the same dimension at every point.
- Wood-frame guide says: subtract 1/4 inch for shimming.
- Here: the deduction depends on whether you’re doing an insert (pocket) replacement into the existing frame or a full-frame replacement that pulls the frame and sets a new buck into the masonry. Different deduction, different anchor layout.
That last point is the one people skip, and it’s the one that costs the most rework.
Insert vs. Full-Frame: The Deduction Chart That Decides Your Size
An insert replacement keeps the existing frame and drops the new impact unit inside it. A full-frame replacement pulls the old frame out entirely and sets a new window into a buck that’s bolted or anchored to the concrete block. Most North Miami Beach homes built before 1980 need a full-frame job if the original frame is steel, rotted, or badly out of square – a pocket insert only works when the old frame is sound and reasonably true.
What you subtract from your measurements depends on which path you’re taking:
- Insert replacement: measure the existing frame’s inside opening. Subtract the shim allowance on each side and the head/sill clearance your manufacturer specifies. The remaining number is your target unit width and height.
- Full-frame replacement: measure the frame’s outside edges and the masonry reveal depth. Your target unit sits inside a new buck, so the deduction runs against the buck dimensions, not the frame. The buck itself is sized to the masonry opening and anchored into the block, and that anchor spacing is set by the impact product’s Miami-Dade approval.
This is where a tape measure stops being enough. Impact glass in Miami-Dade is certified under a Notice of Acceptance (NOA), and each product is tested at specific sizes. Custom-sizing a unit means verifying the new dimensions still fall inside that product’s approved size matrix – something you never think about when you’re replacing a standard stock window. Order a custom unit that lands outside the approved matrix and you don’t have a certified window anymore, which is the difference between passing your inspection and starting over. Groundwork’s technicians know which units carry current Miami-Dade NOAs and which sizes stay inside the approval, and they check that before a single unit gets ordered.

Out-of-Square Is the Rule in These Homes, Not the Exception
Fifty-plus years of heat cycling – that relentless South Florida expansion-and-contraction – plus minor soil movement on the shallow footings common west of Biscayne Boulevard means many original masonry openings in North Miami Beach are no longer plumb or square. A window that measured 60 inches across at the top in 1968 may read 59 5/8 at the bottom today.
That’s why you measure three points each way. If your top-to-bottom width readings differ by more than about an eighth of an inch, or your side-to-side height readings drift the same way, you’re looking at an out-of-square opening. A replacement unit set into a twist will bind on the sash, leak at the corners, and fight you every time you open a slider. The fix isn’t to force it – it’s to size and shim to the out-of-square condition, which means custom sizing becomes the norm rather than the exception on these homes.
You can spot it before you even pull a tape. Look for daylight gaps at the existing frame corners, a sash that rubs on one side, or a sill that’s cracked away from the stucco. Those are the symptoms of a frame that’s moved and stayed moved.
What a Professional Measure Captures That Yours Won’t
Width times height is maybe a third of the job. When Groundwork’s technicians walk a North Miami Beach site, they’re recording the sill condition (is the concrete sill sound, cracked, or holding water), the masonry reveal depth (it varies window to window and drives how far the unit sits back from the stucco face), and the anchor point spacing the buck will need. Each of those changes what your manufacturer has to build.
This is a hands-on protocol, and our technicians bring up to 12 years of it to the measuring tape. We measure, we flag the out-of-square openings, we confirm the product’s NOA size range, and we hand you a quote with the number you’ll actually pay – upfront pricing, no surprises. Every installation backs that with our 730-Day Done Right Promise: if it’s not done right, we make it right. And on the material side, we work with custom-sized impact units from Andersen and Marvin, both of which build within their Miami-Dade-approved size ranges, so a non-standard CBS opening doesn’t force you into a compromise unit. You can see the full scope of what we handle on our Windows & Doors page.
What a typical replacement runs in North Miami Beach, market-calibrated:
| Scope | Typical range |
|---|---|
| Standard window replacement | $5,310-$17,700 |
| Impact window installation | $9,440-$29,500 |
Custom-sized impact units run toward the high end of those ranges, since the measurement work and the approval verification add steps a stock order skips. We offer 0% financing for 18 months and $1,000 off projects over $10,000 to make a full-set replacement easier to swing.
Every project here also has to satisfy Miami-Dade’s High Velocity Hurricane Zone rules and the City of North Miami Beach building department’s permit timeline, so window selection and NOA verification aren’t optional steps – they’re what gets your permit issued and your inspection passed. If you’d rather have the measuring done once, correctly, before you order anything, that’s the free estimate call.
Frequently Asked Questions
Measure the existing frame’s inside daylight opening, not the masonry rough opening, taking three width readings (top, middle, bottom) and three height readings (left, middle, right). Then record the masonry reveal depth so the new unit and its buck are sized to the actual opening – the extra readings tell you if the opening is out of square, which is common in older North Miami Beach CBS homes.
Replacing glass only costs a fraction of a full replacement, but it only works when the existing frame is sound, square, and still in condition to hold a new glazed unit. On a fifty-year-old steel or wood frame in North Miami Beach, a glass-only swap often means chasing a leak you can’t seal – a full-frame replacement is the honest answer.
Yes – the measuring visit and the quote are part of the same free estimate appointment, so you’re not waiting on a second trip to get a number. Call (844) 797-4868 and we’ll get you on the schedule; a live person answers around the clock.
Then you order a custom-sized unit rather than fight a stock one into the opening – the measuring protocol accounts for the twist, and the unit is built to it. Our technicians identify out-of-square openings during the site visit so the order reflects what’s actually there, backed by our 730-Day Done Right Promise on the install.
Get Your Windows Measured Right the First Time
Measuring a North Miami Beach window isn’t the same job as measuring one in a wood-framed house, and getting it wrong means a custom unit that won’t fit. If you’d rather have it looked at, Groundwork Construction Co. of North Miami Beach offers a no-pressure assessment in North Miami Beach – call (844) 797-4868 for a free estimate, and you’ll have exact numbers before you commit to a single window.
Written by the team at Groundwork Construction Co. of North Miami Beach, serving North Miami Beach, FL.


