







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in North Miami, FL: What It Takes and What It Costs
Door installation in North Miami typically runs $1,200 to $4,800 per door once you account for a coastal-grade unit, Miami-Dade product approval, and the fastening work on old concrete-block walls. A straightforward interior door swap takes a few hours; an exterior entry, impact-rated door or a carport-to-room doorway takes one to three days. Call (844) 797-4868 with your address and we’ll walk you through your options and set up a free on-site estimate.
How our door installation process runs, stage by stage

Every door is different, but the sequence doesn’t change much. Here’s what actually happens, in order, so you know where you’ll be asked to make a decision.
Stage 1: Site visit and measurement (day 1, about 45 minutes)
We measure the rough opening, check the wall assembly for rot, termite damage or rebar corrosion bleeding through the block, and confirm the swing and hand of the door. This is when you decide whether you’re matching the existing door size or changing it. Changing size on a CBS wall is a bigger conversation than changing the door.
Stage 2: Product selection and permit filing (days 2 to 10, mostly waiting on paperwork)
You pick the door, the frame material, the hardware and the finish. For anything on the exterior, we confirm the product carries a Miami-Dade County Notice of Acceptance before it’s ordered. On a North Miami exterior door this is usually the longest single stretch of the job, because the permit and product approval review happen here. You’ll sign off on the quote before we file.
Stage 3: Demolition and opening prep (a few hours)
Old door out, old casing and threshold removed, and the opening cleaned and squared. On a 1950s block wall we often find corrosion where the old anchors met the rebar, and that gets treated before anything new goes in. Interior doors skip most of this stage.
Stage 4: Installation and flashing (half a day to a full day)
Frame set, shimmed and anchored with stainless fasteners, door hung, hardware installed, and on exterior doors the flashing, sill pan and sealant done properly. This is the part that decides whether the door leaks in a summer storm. You’ll decide on hardware finish and any deadbolt or smart-lock upgrade at this point.
Stage 5: Inspection and walkthrough (day of completion)
Where a permit was pulled, the inspector signs off, then we walk the door with you: swing, latch, weatherstripping seal, and finish. Most single-door jobs finish in a single visit after the permit clears. Two doors or a doorway tied to a larger project can run two to three days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Most of the cost difference between one quote and another sits in the door itself and the hardware. These are the choices that actually come up:
- Fiberglass exterior doors: the standard pick in coastal South Florida. They don’t rust or swell, hold paint and stain well, and come in impact-rated models. They’re the middle price point and the one most North Miami homeowners land on.
- Steel exterior doors: cheaper up front and strong, but the coastal salt air is hard on the finish. Rust at the bottom rail and around hardware is common within a few years unless the coating is maintained. Good for a rental property where cost rules.
- Wood and solid-core wood: beautiful and heavy, and the worst performer in this climate on an exterior. Save wood for interior doors and entry doors that sit well under a deep porch overhang with good sealing.
- Vinyl and composite interior doors: the practical choice for bedrooms, closets and bathrooms in a 1940s – 1970s block house. Light, stable, and they don’t move with humidity the way a hollow-core wood door does.
- Impact-rated glass and door systems: if the door has glass, this is the decision that matters most. A product-approved impact door adds real cost, but on a North Miami exterior it’s what eventually satisfies wind-mitigation requirements and keeps the opening sealed in a storm.
- Hardware and locksets: range from a basic passage set to a keyed entry with a smart lock. Stainless or coated hardware holds up far better near the coast than the standard plated sets.
Frame material matters too. Aluminum frames with a thermal break and properly sealed thresholds outlast a cheap wood frame on an exterior opening. We carry brands like Andersen where the door is exposed and the budget allows, and we’re upfront when a standard unit is fine and you don’t need to spend more.
What Door Installation costs in North Miami, FL

Expect $1,200 to $4,800 per door for a full replacement including the unit and hardware. Here’s how that range breaks down:
| Item | Typical range |
|---|---|
| Interior door replacement (single) | $350 – $1,100 |
| Exterior entry door, fiberglass, standard | $1,200 – $2,800 |
| Exterior impact-rated door with glass | $2,400 – $4,800 |
| Hardware and lockset upgrade | $150 – $650 |
| Wall repair, rot or corrosion treatment | $250 – $1,400 |
| Permit fees (exterior, when required) | $150 – $600 |
The variables that push a job to the high end: changing the opening size on a block wall, discovering corroded anchors or rotted framing behind the old door, choosing an impact-rated unit with glass, and adding a deadbolt or smart-lock system. A same-size swap with a standard fiberglass door sits near the bottom. The written estimate lists door, hardware, labor, permit and any repair allowance as separate line items, and the number you sign is the number you pay. If we find rot mid-job, we stop and quote it before touching it, never silently.
For North Miami projects over $10,000 that combine door work with other projects, we offer $1,000 off and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat North Miami homes specifically do to this job
North Miami is a built-out inner suburb where most of what we’re installing is a replacement or a repair, not new construction. The housing stock runs to 1940s – 1970s CBS and concrete-block homes, many with attached carports, flat roofs and older electrical and plumbing. That shapes door work in a particular way. The most common job we do here is not a straight swap: it’s turning a carport into a bedroom or family room, which means a new exterior door opening in a block wall that needs proper flashing, impact-rated glazing and Miami-Dade product approval before the wall is closed up. One missed inspection on an older CBS house can stall the entire permit, so we schedule for the inspection, not around it.
The salt air speeds up corrosion on hinges, tracks, fasteners and the rebar at the wall edge. A door that looks fine from the outside often has a soft sill or a hinge that’s started to bleed rust. That’s why we use stainless or corrosion-coated hardware on every exterior opening and treat any bleeding rebar before we set new anchors.
The permitting reality here is strict: exterior doors need a permit, product approval on the unit, and a final inspection. Miami-Dade’s wind-mitigation detailing applies, and tight lot lines and right-of-way limits mean we plan for impact without moving an opening that runs into the property line. We regularly handle this on projects in the 33161 ZIP and neighborhoods across North Miami.
Serving North Miami, FL – Our Local Coverage Area
We serve North Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in North Miami

Most single interior doors are installed in a few hours. An exterior door with a permit takes one to three days of work but one to three weeks of calendar time while the permit and product approval clear. When door installation happens alongside a larger project, we sequence it so the opening isn’t left exposed. Call (844) 797-4868 for an estimate based on your specific door.
Exterior door replacement needs a permit and a final inspection; interior door swaps generally don’t. The tighter constraint is product approval on an exterior unit, which has to be verified before installation. We file the permit and arrange the inspection as part of the job, and our written estimate spells out the permit scope up front. Call for a free estimate and we’ll tell you exactly what your door needs.
Yes, in most cases. A same-size replacement leaves the wall and the rough opening alone. The exception is when you want a wider or relocated opening, which means wall work and, on an older CBS house, a structural check. We’ll tell you at the estimate if your door falls into that category. Call (844) 797-4868 for a free on-site assessment.
Standard fiberglass exterior doors run $1,200 to $2,800 installed; impact-rated doors with glass run $2,400 to $4,800. Hardware, rot repair and permit fees add to that range. You get a written line-item quote, and the price you sign is the price you pay. Call (844) 797-4868 for an exact number for your opening.
Every door we install is covered by the 730-Day Done Right Promise; if it’s not done right, we make it right. That covers workmanship and hardware installation, and it pairs with the door manufacturer’s own product warranty. Reach us at (844) 797-4868 and we’ll walk you through both before you commit.
Ready for a free estimate in North Miami?
Call (844) 797-4868 to schedule a free on-site estimate for door installation in North Miami. We’ll measure the opening, check the wall for corrosion or rot, confirm what product approval your exterior door needs, and hand you a written line-item quote. No pressure, no vague bid. Our technicians have up to 12 years of experience, we pull the permits, and every job is backed by the 730-Day Done Right Promise. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












