







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Miami Shores, FL: What the Job Actually Involves
A paver driveway in Miami Shores typically costs $8,260 to $21,240 and takes 3 to 6 working days from demolition to the final sweep of joint sand. You’ll spend most of that time on base prep, not on laying pavers. Most Village homes also need a driveway approach reviewed against the tree protection rules before a single paver goes down. Call (844) 797-4868 and we’ll walk your drive and give you a written, line-item number.
Key Takeaways
- Typical range: $8,260 – $21,240, driven mostly by square footage, base condition, and paver grade.
- Realistic schedule: 3 – 6 working days of site work, plus material lead time.
- Live-oak canopy and Village tree rules can shape the layout before any excavation.
- Every job is covered by our 730-Day Done Right Promise, in writing.
How We Install Paver Driveways in Miami Shores, Step by Step

Every paver driveway here follows the same sequence. The durations below are what we plan on for a standard two-car drive. Bigger footprints or tight access add days, not surprises.
Day 1 – Walkthrough and demolition. We mark utilities, confirm the final layout, and saw-cut and break out the old surface. Expect one heavy, dusty day. You’ll need to park on the street or a neighbor’s apron overnight; we’ll tell you exactly how long.
Day 1-2 – Excavation and base. This is the part nobody photographs and everyone notices in year four. We excavate to depth, then bring in compacted limerock base, compacted in lifts with a plate compactor. Miami-Dade’s high water table and sandy soil mean drainage has to be designed in, not hoped for. You decide the slope: away from the garage, or toward a swale or drain. We’ll recommend one.
Day 2-3 – Edge restraint and bedding sand. A paver drive holds its shape because of the edge. We set a concrete or PVC edge restraint along both sides, then screed a consistent bedding sand layer. Skipping this step is the number one reason driveways here develop ruts and spreading joints within a few seasons.
Day 3-5 – Laying pavers. Pavers go down in your chosen pattern, cut tight at the garage apron, walkway seams, and edging. You confirm the pattern and the paver color before we open the first pallet, not after.
Day 5-6 – Compaction, joint sand, and clean-up. We run a plate compactor over the finished field, sweep polymeric joint sand into the joints, and clean the surface. Final walkthrough with you. Anything that doesn’t sit right gets corrected before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Miami Shores Paver Driveway
Most homeowners here are picking between a handful of real choices, and each one carries an honest trade-off.
- Concrete pavers (the workhorse). The most common pick for a Miami Shores paver driveway. Dense, colorfast, and they hold up to sun and salt air. Expect them in the middle of the price range. Belgard is a solid benchmark for color and style.
- Clay brick pavers. Warm, dimensional, and classic against Mediterranean Revival stucco. They cost more and are heavier to install, but they resist staining better than some concrete blends. Best for homeowners who want the drive to read as period-correct.
- Permeable pavers. A smart fit where drainage is tight or where you want to reduce runoff. They cost a bit more in material and base prep, but they help with the standing-water problem that Miami Shores’ high water table can create.
- Pattern and layout. Herringbone is stronger under tire traffic; running bond and basketweave read quieter and more traditional. Herringbone takes more cuts and adds labor.
- Color and finish. A tumbled or antiqued finish hides tire marks and blends with older stucco. A smooth finish looks sharper and shows every stain.
- Edge restraint. Concrete edge is the durable standard. PVC edge is a lighter option where the budget is tight.
If you want this tied into a wider yard or hardscape plan, that’s part of a full Driveway & Pavers in Miami Shores conversation, and we’re glad to price both together.
What Paver Driveways Cost in Miami Shores, FL

A paver driveway in Miami Shores runs $8,260 to $21,240 installed. That range assumes a standard residential drive; long runs, tight access, and heavy base repair push toward the top. Four things move the number:
- Square footage. A one-car drive sits at the bottom; a wide two-car or circular drive sits at the top.
- Existing surface and base. Old concrete or asphalt that has to come out, or a base that needs full replacement, adds cost. A sound base saves it.
- Paver grade and material. Concrete pavers are the baseline; clay brick and permeable systems land higher.
- Permit and tree protection. If the Village requires a tree barricade plan or a permit for the approach, that’s real scope and real time.
Every written estimate itemizes demo, base, edge restraint, pavers, joint sand, and haul-away. What’s often not included: relocating utility lines, drainage repair hidden under an old slab, and landscaping restoration around the edges. We flag those before we start, not after. Our Driveway & Pavers service carries the same upfront-pricing standard, and financing at 0% for 18 months is available on larger jobs.
See the difference
Before
After
Before
After
Before
AfterWhat Miami Shores Homes Specifically Do to This Job
Miami Shores runs its own building department and design-review process, so permitting a driveway here is a Village conversation, not a county one. Every project is an alteration inside a neighborhood that’s already built out, and the mature live-oak canopy over most of the Village means a tree-protection review can reshape your layout before excavation starts. We plan for that early. The 1920s-era Mediterranean Revival and Mission homes here were designed around original drives and narrow aprons, so a wider modern drive may need an adjusted approach. Plenty of these lots are non-conforming, which affects how much impervious surface you can add. In homes around the Village’s older blocks off Northeast 2nd Avenue, we regularly see original concrete drives from the 1950s and 1960s that crack and settle because the base was thin and the water table moves. You often pair a new driveway with Door Installation in Miami Shores during the same exterior phase.
Serving Miami Shores, FL – Our Local Coverage Area
We serve Miami Shores and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Miami Shores

Most paver driveways in Miami Shores take 3 to 6 working days once we’re on site, plus material lead time. Concrete pavers and clay brick both ship quickly for standard colors; custom blends add a week. Call (844) 797-4868 for a schedule estimate on your address.
The answer depends on your lot and whether you’re changing the approach or the impervious surface, and it’s a question for the Village’s building department. As a rule, an in-kind resurface is simpler than cutting a new drive or widening one. We walk this through with you during the estimate and pull what the Village requires.
Yes, in most cases the utilities under a residential drive stay put and we excavate around them. What we can’t know until we’re on site is whether an older slab hides a shallow line or a failed drainage pipe. If we hit one, we stop, show you, and price the fix before we continue.
Between $8,260 and $21,240 for a standard residential drive. The low end is a modest one-car footprint with a sound base; the high end is a wide drive, clay brick or permeable pavers, heavy base work, or tree protection scope. Call for a written, line-item quote; it’s free.
Every paver driveway we install is backed by our 730-Day Done Right Promise. If something isn’t set, edged, or finished to spec, we make it right. Paver manufacturers also cover their product separately; we’ll go through both with you before the job starts.
Ready for a Paver Driveway in Miami Shores?
We’ll come out, measure your drive, look at the base, check the tree canopy, and give you a written, line-item estimate for paver driveways in Miami Shores. No pressure, no vague numbers. When you call (844) 797-4868, a live person answers – any hour, any day – and we’ll get you on the schedule. If you’re also planning interior work, homeowners often pair this with Cabinets & Countertops in Miami Shores, and we’re happy to cover our full Miami Shores service area while we’re there.
Written by the team at Groundwork Construction Co.












