







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Miami Beach: What to Expect
Paver driveway installation in Miami Beach typically runs $8,260 – $21,240, depending on square footage, base prep, and whether the job has to clear the city’s coastal permitting. Most of our paver driveways here are done in three to five working days once permits are in hand. Call (844) 797-4868 and we’ll walk you through the number for your lot.
How our Paver Driveways get built, stage by stage

Every paver driveway we build in Miami Beach follows the same sequence, because barrier-island ground doesn’t tolerate shortcuts. Here’s what actually happens, and when.
Stage 1: Site measure and layout (day 1)
We start by shooting the elevations and measuring the existing apron, sidewalk connections, and the slope away from your garage. On a lot in Miami Beach this is where we discover whether the old slab pitched toward the house or toward the drain. You’ll decide the paver color and running-bond layout the same day so the order goes in early.
Stage 2: Demo and excavation (days 1 – 2)
Existing concrete, old pavers, and topsoil come out to a depth of roughly 8 to 12 inches, enough for a proper compacted base. Two-person crews on a typical 400-square-foot driveway clear this in a day, sometimes a day and a half if there’s thick unreinforced concrete to break. Deck drains and existing utility laterals stay marked and protected throughout.
Stage 3: Base and drainage (days 2 – 3)
We lay 6 to 8 inches of compacted aggregate, plate-compact it in lifts, then set the bedding course. Drainage is the part crews skip and Miami Beach won’t let you forget: we slope away from the structure and connect the paver surface to a positive drain or the existing storm path. You’ll walk the base with our lead before we set a single paver.
Stage 4: Paver setting and edge restraint (days 3 – 4)
Pavers go down over the bedding sand, cut at the perimeter and around any light bollards or drains. Edge restraint and a sand-swept finish lock the field. Salt air here is unforgiving to anything metal beneath the surface, so we spec stainless or hot-dipped edge and anchor hardware as standard, not as an upgrade.
Stage 5: Compaction, cleanup, and walkthrough (day 4 – 5)
We run the plate compactor over the finished field, sweep and re-sweep the joints, hose it down, and haul off debris. Final walkthrough is with you, checking slope, joint lines, and the edge restraint. You’ll get a maintenance sheet for the first wet-season sweep and a written warranty on the install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The paver options you’ll actually choose between
Most of the decisions on a paver driveway come down to four items, and each one moves both the price and the durability curve.
- Concrete pavers vs. clay brick: Concrete pavers are the workhorse on Miami Beach driveways; they hold color for years and cost less per square foot. Clay brick runs higher, but the finish reads right on the Mediterranean Revival and Art Deco fronts in 33139.
- Thickness and grade: 60mm pavers are the standard for residential driveways. Anything under 60mm is a patio paver, and we won’t install it where a car parks.
- Color and finish: Standard integrally colored pavers are the value play. Tumbled or shot-blast finishes hide tire marks better and cost a bit more per unit; premium face-mix or “color-through” pavers hold their tone longest under sun and salt.
- Base and drainage spec: A properly compacted aggregate base with a positive drain is the single biggest driver of longevity. Cutting base on a coastal lot is how pavers sink and heave within two seasons.
- Permeable systems: Open-joint or permeable pavers with an aggregate base let water through the surface, which matters on a lot with limited flow-off. They cost more to install but help on low-lying sites in 33140 where stormwater has nowhere to go.
If the project is part of a full Driveway & Pavers in Miami Beach scope with walkways and a patio, we plan the layout as one drawing so the joints and color runs carry across surfaces.
What Paver Driveways cost in Miami Beach, FL

A paver driveway in Miami Beach lands between $8,260 and $21,240 for most residential jobs. That’s our market-calibrated range, not a teaser. What pushes it up or down:
- Square footage: the biggest lever. A 300-square-foot single-car apron sits at the low end; a 700-plus-square-foot driveway with a turnaround drives it toward the top.
- Existing surface condition: clean removal of an old concrete slab costs more than pulling worn-out pavers.
- Base and drainage work: if the lot needs a new drain tie-in or regrading to shed water away from the garage, that adds a day and cost.
- Paver grade and cut pattern: clay brick, tumbled finishes, and complex patterns with heavy field cuts push the number up.
- Permit scope: coastal and flood-plain jobs may trigger additional review, which adds to time and paperwork cost.
Every written estimate we hand you is line-itemed: demo, haul-off, base, drainage, pavers, edge restraint, compaction, and cleanup. What’s often not included: relocating a utility, repairing a cracked apron where it meets the street, and any landscape re-grading beyond the driveway footprint. We call those out before work starts so nothing surprises you mid-job. Stack our $1,000 off projects over $10,000 with 0% financing for 18 months, and larger jobs get easier to stomach. Every install is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Miami Beach homes specifically do to this job
Miami Beach is a barrier island, and the driveway you build here lives a different life than one on the mainland. Salt-laden wind off the Atlantic corrodes every metal piece you bury under the field, so edge restraint and anchor hardware get stainless or hot-dipped spec as a matter of course, especially on properties in 33140 and 33141 within a few blocks of the water. Low-lying lots in 33139 and 33140 see tidal and storm-surge groundwater intrusion, which is why we don’t cut corners on base depth or drainage ties. If your driveway sits in the flood plain, the city’s strict coastal building code can require an elevation certificate and wind-mitigation review even for what looks like a simple resurfacing. Historic-district properties in 33139 add a design-review step if the driveway edge, entry, or railing changes at all. The housing stock you’ll see us working around runs from Mediterranean Revival and Art Deco masonry in 33139 to 1950s – 70s mid-rises through 33140, plus gated single-family estates on North Bay Road and La Gorce, where pavers often need to match a stucco-and-coral-rock frontage. The failure modes we see are consistent: sinking along the street apron, paver drift where the base was under-compacted, and salt-etched finishes that lost color years early. Our Driveway & Pavers service handles the wider scope, and we work across Miami Beach from the Venetian Islands to North Beach.
Serving Miami Beach, FL – Our Local Coverage Area
We serve Miami Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Miami Beach

A typical Miami Beach paver driveway takes three to five working days from demo to walkthrough, once permits clear. Coastal and flood-plain review can add a week or more to the permitting side, so plan for that if your lot sits in 33139 or 33140. Call (844) 797-4868 for a scheduling estimate on your address.
Yes. Miami Beach requires a permit for driveway installation and replacement, and coastal or flood-plain lots may trigger elevation and wind-mitigation review on top of that. We pull the permit and handle inspection for you; it’s part of our standard scope.
Sometimes yes, often no. If the existing concrete is structurally sound and provides a level base, a paver overlay is faster and cheaper. On Miami Beach, though, salt-driven spalling and cracked aprons make overlays a gamble; we test the slab and tell you straight whether it will hold.
Yes, when spec’d right. Face-mix concrete pavers and clay brick both handle salt and UV well, and stainless or hot-dipped edge restraint prevents the corrosion failures we see on cheap installs. Base depth and drainage matter more than the paver itself for storm resilience.
Our paver installs are covered by the 730-Day Done Right Promise. If something shifts, sinks, or fails because of our workmanship within that window, we come back and make it right at no charge.
Homeowners frequently pair a new driveway with Door Installation in Miami Beach for wind-rated entry, and some also schedule Cabinets & Countertops in Miami Beach in the same visit if the interior is getting refreshed.
Ready to price your paver driveway?
Call (844) 797-4868 to set up a free on-site estimate for Paver Driveways in Miami Beach. A live person answers, day or night. On the visit we measure your apron, walk the drainage, and hand you a written line-item quote. No change orders, no surprise extras.
Written by the team at Groundwork Construction Co.












